Light aircraft above the clouds

Free practice

SACAA PPL Aircraft Technical & General practice questions

10 free questions with explanations, from LegendSky Ground School

← All free practice questions

About the Aircraft Technical & General exam

Aircraft Technical and General is one of the SACAA Private Pilot Licence theory subjects. It covers how a light aeroplane works: the piston engine, fuel and ignition systems, carburettor icing, the propeller, electrical and vacuum systems, and the flight instruments.

The pass mark for the SACAA PPL theory exams is 75%.

The 10 questions below were written by LegendSky Ground School to match the PPL aircraft technical and general syllabus. They are not official SACAA exam questions. Click the answer you think is right: you’ll see straight away whether you got it, followed by an explanation of the right answer and why each of the other options is wrong.

Question 1

Carburettor icing is most likely when:

  • A. The air is very cold and dry
  • B. There is visible moisture such as cloud or rain, and only then
  • C. The air is humid, even on a warm day, especially at low power settings
  • D. The engine is at full power on take-off
Show answer and explanation

Answer: C. The air is humid, even on a warm day, especially at low power settings

Air speeding up through the carburettor venturi drops in pressure, and evaporating fuel cools it further, so the temperature inside can fall by 20°C or more. If the air is moist, ice can form even on a warm day. The risk is greatest at low power, such as in a descent, because the partly closed throttle valve adds to the restriction.

Why the other options are wrong

A. Very cold air holds little moisture, so the risk of carburettor icing is lower.

B. Carburettor ice can form in clear air if the humidity is high. You do not need to be in cloud or rain.

D. The risk is greatest at low power settings, when the partly closed throttle valve restricts the airflow.

Question 2

In an aeroplane with a fixed-pitch propeller, the first sign of carburettor ice is usually:

  • A. A gradual drop in RPM
  • B. A rise in oil temperature
  • C. A rise in RPM
  • D. An increase in fuel pressure
Show answer and explanation

Answer: A. A gradual drop in RPM

Ice building up in the carburettor restricts the airflow into the engine, so power drops. With a fixed-pitch propeller this shows as a gradual drop in RPM, possibly followed by rough running. Applying full carburettor heat often causes a further small drop and some rough running as the ice melts, before the RPM recovers.

Why the other options are wrong

B. Oil temperature is not an early sign of carburettor ice.

C. Ice restricts the airflow to the engine, so power and RPM fall, not rise.

D. Carburettor ice does not affect the fuel pressure reading.

Question 3

During the magneto check, you switch from BOTH to LEFT and there is no RPM drop at all. This most likely means:

  • A. The engine is in perfect condition
  • B. The right magneto is not being switched off, possibly because of a broken earth wire (P-lead), so it could still be live
  • C. The left magneto has failed
  • D. The spark plugs are fouled
Show answer and explanation

Answer: B. The right magneto is not being switched off, possibly because of a broken earth wire (P-lead), so it could still be live

Each magneto fires one plug in every cylinder. Running on one magneto burns the mixture less efficiently, so a small RPM drop is normal. No drop at all suggests the other magneto has not switched off, usually because its earth wire (P-lead) is broken. That magneto is then live, so the engine could fire if the propeller is turned by hand, even with the switch off.

Why the other options are wrong

A. A small RPM drop is normal on a single magneto. No drop at all is a warning sign.

C. If the left magneto had failed, the engine would run very roughly or stop when you select LEFT.

D. Fouled plugs cause a large RPM drop or rough running, not no drop at all.

Question 4

Why do you lean the mixture as you climb?

  • A. To make the engine run cooler
  • B. Because the fuel pump delivers less fuel at altitude
  • C. To increase the density of the air
  • D. The air is less dense, so the same amount of fuel makes the mixture too rich
Show answer and explanation

Answer: D. The air is less dense, so the same amount of fuel makes the mixture too rich

As you climb, each litre of air contains less oxygen, but the carburettor keeps delivering much the same amount of fuel. Without leaning, the mixture becomes too rich, wasting fuel, fouling the spark plugs and reducing power. Leaning restores the correct fuel-to-air ratio. Always follow the aircraft’s handbook, because over-leaning at high power can cause overheating and detonation.

Why the other options are wrong

A. Leaning generally raises engine temperatures. A richer mixture helps with cooling.

B. The fuel pump is not the reason. The issue is the lower air density.

C. Leaning cannot change the air density. It adjusts the fuel to match it.

Question 5

Using fuel with a lower octane rating than the engine requires can cause:

  • A. Carburettor icing
  • B. Detonation
  • C. More engine power
  • D. A lower cylinder head temperature
Show answer and explanation

Answer: B. Detonation

Detonation is the sudden, explosive burning of the fuel-air mixture in the cylinder, instead of a smooth, even burn after the spark plug fires. Lower-octane fuel resists it less, so detonation is more likely, especially at high power, with a lean mixture or high temperatures. It can damage pistons and cylinders very quickly. Always use the fuel grade specified for the engine.

Why the other options are wrong

A. Carburettor icing depends on temperature, humidity and power setting, not on octane rating.

C. The wrong fuel does not give more power. It risks serious engine damage.

D. Detonation raises cylinder head temperature, it does not lower it.

Question 6

If the static port becomes completely blocked during a climb, the altimeter will:

  • A. Read zero
  • B. Over-read by a fixed 1,000 ft
  • C. Keep showing the altitude at which the blockage happened
  • D. Continue to work normally
Show answer and explanation

Answer: C. Keep showing the altitude at which the blockage happened

The altimeter measures static pressure only. If the static port blocks, the pressure trapped in the instrument stays the same, so the altimeter freezes at the altitude where the blockage happened. The vertical speed indicator will show zero and the airspeed indicator will also give false readings. Many aircraft have an alternate static source for exactly this situation.

Why the other options are wrong

A. The altimeter does not drop to zero. It holds the pressure that was trapped when the port blocked.

B. There is no fixed error. The reading simply stops changing.

D. With the static port blocked, the altimeter no longer receives changing static pressure, so it cannot work normally.

Question 7

Which instrument uses pressure from the pitot tube?

  • A. The altimeter
  • B. The airspeed indicator, the altimeter and the vertical speed indicator
  • C. The attitude indicator
  • D. The airspeed indicator only
Show answer and explanation

Answer: D. The airspeed indicator only

The airspeed indicator compares the pressure from the pitot tube with the static pressure from the static port. The difference is dynamic pressure, which it shows as airspeed. The altimeter and the vertical speed indicator use static pressure only. The attitude indicator and heading indicator are gyroscopic instruments, usually driven by a vacuum system or electrically.

Why the other options are wrong

A. The altimeter uses static pressure only.

B. The altimeter and vertical speed indicator use static pressure only. Only the airspeed indicator uses pitot pressure.

C. The attitude indicator is a gyroscopic instrument and is not connected to the pitot tube.

Question 8

In a typical light aeroplane, a vacuum pump failure will affect:

  • A. The attitude indicator and the heading indicator
  • B. The airspeed indicator and the altimeter
  • C. The turn coordinator only
  • D. The magnetic compass
Show answer and explanation

Answer: A. The attitude indicator and the heading indicator

In many light aeroplanes the attitude indicator and heading indicator are spun by air drawn through them by an engine-driven vacuum pump. If the pump fails, the gyros slow down and these instruments gradually become unreliable. The turn coordinator is usually electric, so it keeps working. That mix of vacuum and electric gyros is deliberate, so one failure does not take out every gyro.

Why the other options are wrong

B. These are pitot-static instruments and do not use the vacuum system.

C. The turn coordinator is usually electrically driven, so it is normally the gyro instrument that keeps working.

D. The magnetic compass needs no power or vacuum to work.

Question 9

The magnetic compass gives its most reliable reading when the aeroplane is:

  • A. Turning
  • B. Accelerating
  • C. Flying straight and level at a steady speed
  • D. Climbing in a turn
Show answer and explanation

Answer: C. Flying straight and level at a steady speed

The compass magnets line up with the Earth’s magnetic field, which dips towards the ground away from the equator. Because of this dip, the compass shows errors when the aeroplane accelerates, decelerates or turns. It only reads reliably in straight and level, unaccelerated flight, which is why you align the heading indicator with it during steady flight.

Why the other options are wrong

A. Turning errors make the compass lag or lead during a turn.

B. Acceleration makes the compass swing and show a false turn.

D. Combining a climb and a turn adds to the errors rather than removing them.

Question 10

In flight, the ammeter shows a steady discharge and the low-voltage light comes on. The most likely cause is:

  • A. The battery is being overcharged
  • B. The alternator has failed and the battery is now powering the electrical system
  • C. Both magnetos have failed
  • D. The engine-driven fuel pump has failed
Show answer and explanation

Answer: B. The alternator has failed and the battery is now powering the electrical system

When the alternator stops charging, the battery supplies all the electrical power and starts to run down. That shows as a discharge on the ammeter and a low-voltage warning. Switch off non-essential equipment to save the battery and follow the checklist. The engine keeps running, because its ignition comes from the magnetos, not from the aircraft’s electrical system.

Why the other options are wrong

A. Overcharging shows as a high charge rate, not a discharge.

C. The magnetos are separate from the aircraft’s electrical system, and if both failed the engine would stop.

D. A fuel pump failure does not cause an ammeter discharge or a low-voltage warning.