Flight Planning & Performance

Uncategorized
Wishlist Share

About Course

Welcome to Flight Planning & Performance

Know what your aircraft can do today, before you ask it to do it.

Welcome to the LegendSky Ground School Flight Planning & Performance course. Every flight starts long before the engine does. Before you taxi, you need to know three things with certainty: is the aircraft loaded safely, will it perform on this runway in today’s conditions, and do you have enough fuel to get there and back with a margin to spare? This subject teaches you how to answer all three.

An aeroplane that flew perfectly yesterday can struggle today. A full load of passengers, a hot afternoon, a high elevation airfield or a short grass strip can each change what the aircraft is capable of, and together they can turn a routine take-off into a dangerous one. The figures you need are all in the aircraft’s documents and performance charts. This course teaches you to read them accurately and to trust the numbers over your instinct.

It is also one of the most directly practical subjects you will study. Every calculation in this course is one you will do yourself before real flights, for the rest of your flying career.

How This Course Works

Each subtopic follows the same four-step cycle. Complete all four before moving on, and the subject builds naturally.

1. Watch • 2. Read

  • Video Lesson: Every subtopic has its own video, walking you through the concepts and showing how each chart and calculation is worked in practice.
  • Full Written Notes: Each lesson is backed by complete written material covering that part of the syllabus, so nothing is left for you to find elsewhere.
  • Worked Examples: Every calculation is demonstrated step by step, with the reasoning shown in full, so you learn the method rather than memorising an answer.

3. Test • 4. Prove

  • Topic Quizzes: Test your knowledge immediately after each lesson. Retaking a quiz presents all the questions in a newly randomized order, so you cannot pass by remembering the sequence.
  • Master Mock Exams: When you are ready, tackle the mock exams. Each attempt pulls a completely fresh, randomized subset of questions to simulate the real testing environment.
  • Detailed Feedback: Review the explanation for every incorrect answer, so you understand why it was wrong and never make the same mistake twice.

Why This Subject Matters Beyond the Exam

Many of the most serious accidents in light aircraft are not caused by a failure of skill in the air. They are caused by a decision made on the ground: an aircraft loaded beyond its limits or out of balance, a take-off attempted from a runway that was too short for the conditions, or a flight started without enough fuel. In almost every case, the warning was sitting in the aircraft’s own figures, and nobody worked it out.

That is why this course treats every number with care. The aim is not just to pass the paper, but to make careful planning a habit you carry into every flight you make.

Tips for Success

  • Read the Chart Before You Use It: Before entering any performance graph, check what it assumes: the weight, the flap setting, the runway surface, and whether it wants pressure altitude or elevation. Most wrong answers come from using a chart under conditions it was never drawn for.
  • Watch Your Units: Mixing pounds and kilograms, litres and gallons, or fuel volume and fuel weight is the most common way to lose marks in this subject. Write the unit next to every figure as you work.
  • Follow Along, Do Not Just Watch: Have a calculator and the course charts in front of you and work every example yourself as it is demonstrated. These are skills you learn by doing.
  • Sanity Check Every Answer: Before accepting a result, ask whether it makes sense. A heavier aircraft on a hotter day should need more runway, not less. If the answer goes the wrong way, find the error before moving on.
  • Watch the Clock: The official SACAA examination is strictly timed, and chart reading takes longer than you expect. Use the mock exams to practise working accurately under time pressure.
  • Reach Out: If a chart or calculation has you stuck, revisit the video, re-read the notes, or ask. These methods click once you have worked a few examples properly, so do not struggle in silence.

Not ready to enrol yet? Try 10 free Flight Planning & Performance practice questions with full explanations and see how ready you are for the SACAA exam.

Show More

What Will You Learn?

  • Apply ISA, pressure altitude and density altitude to aircraft performance calculations
  • Explain the airspeed definitions and V speeds used in the aircraft flight manual
  • Interpret aerodrome declared distances (TORA, TODA, ASDA and LDA) and the effects of runway slope and surface
  • Read every performance graph in the SACAA exam manual, from take-off and climb to cruise, descent, glide and landing
  • Interpolate performance tables accurately between altitudes, temperatures and weights
  • Apply wind, surface and weight corrections to take-off and landing distances
  • Decide whether a take-off or landing can be made safely on a given runway
  • Convert fuel between US gallons, litres, pounds and kilograms using specific weight and specific gravity
  • Calculate fuel required, endurance, holding time and fuel performance
  • Complete a mass and balance loading form and check the result on the CG envelope
  • Recalculate the CG after adding, removing or moving weight, and after fuel burn-off
  • Calculate the maximum load for a baggage floor area
  • Explain aquaplaning, wake turbulence, wind shear and icing, and how each affects performance
  • Sit the SACAA PPL Flight Planning & Performance examination fully prepared

Course Content

Terminology & Symbols

  • Terminology & Symbols
    10:53
  • Terminology and Symbols

Aerodromes

Performance Graphs

Fuel, Weight & Performance

Mass & Balance

Aircraft Performance

Flight Planning and Performance Mock
Mock Exam for Flight planning and performance

Student Ratings & Reviews

No Review Yet
No Review Yet